test content
What is the Arc Client?
Install Arc

3D printed copy of your own custom ship!

2456789

Comments

  • centaurianalphacentaurianalpha Member Posts: 1,150 Arc User
    edited September 2016
    Cryptic is nothing if not creative in searching for additional income streams from the venerable Trek franchise! This will become a RL version of the GPL trophies for sale in-game, and displayed in the mess hall or ready room. The price will be predictably high, since every model will be unique; the color & material variants alone will pretty much guarantee that. So for the most addicted captains, even the flagship of each 'toon displayed on the wall in one's gaming room will likely require a princely sum, proudly proclaiming their obsession! :D

    PS - I wonder how many model owners will go the extra mile to install the correct lighting? :p
    Expendables Fleet: Andrew - Bajoran Fed Engineer Ken'taura - Rom/Fed Scientist Gwyllim - Human Fed Delta Tac
    Savik - Vulcan Fed Temporal Sci
    Dahar Masters Fleet: Alphal'Fa - Alien KDF Engineer Qun'pau - Rom/KDF Engineer D'nesh - Orion KDF Scientist Ghen'khan - Liberated KDF Tac
    Welcome to StarBug Online - to boldly Bug where no bug has been before!
    STO player since November 2013
  • smokebaileysmokebailey Member Posts: 4,659 Arc User
    Cryptic is nothing if not creative in searching for additional income streams from the venerable Trek franchise! This will become a RL version of the GPL trophies for sale in-game, and displayed in the mess hall or ready room. The price will be predictably high, since every model will be unique; the color & material variants alone will pretty much guarantee that. So for the most addicted captains, even the flagship of each 'toon displayed on the wall in one's gaming room will likely require a princely sum, proudly proclaiming their obsession! :D

    PS - I wonder how many model owners will go the extra mile to install the correct lighting? :p

    Also, will prices vary depending on ship sizes? I mean a Defiant is smaller than a Sovereign, yo.
    dvZq2Aj.jpg
  • tymerstotymersto Member Posts: 433 Arc User
    edited September 2016
    Between what's mentioned in the announcement and the Eucl3d's FAQ page, I wouldn't be surprised to see the ships in the $150-$200 range. And all ships will be 12" long. As can be seen from this pic from Eucl3d's page:

    Gallery_4_Small.jpg?16


    This is definitely one of those "If you can afford it, go for it!" kind of things.


    Thank you for the time...
    STO CBT Player - 400 day+ Vet, Currently Silver
    Cryptic, would you actulaly like me to spend actual Money? It's Simple:
    • Full, Story-driven, select from start 1-50 Klingon Side
    • Scrap current Lock Box & Lobi system for something more reasonable
    • Expand Dil and Rep/Fleet Marks to regular story content
  • officerbatman81officerbatman81 Member Posts: 2,761 Arc User
    It would be ridiculous if they expected regular folks to 3D print the ships themselves.

    I mean, how many of you 3D printers at home, let alone a professional grade highly detailed 3D printer? I never even seen one to buy at regular people stores like Best Buy and Walmart.
    What are they, thousands of dollars?
  • sorceror01sorceror01 Member Posts: 1,042 Arc User
    It would be ridiculous if they expected regular folks to 3D print the ships themselves.

    I mean, how many of you 3D printers at home, let alone a professional grade highly detailed 3D printer? I never even seen one to buy at regular people stores like Best Buy and Walmart.
    What are they, thousands of dollars?

    Actually, depending on branding and size, they can be just a couple of hundred.
    The technology is basically everywhere by now, so commercialization has drastically reduced the pricing of the machines.
    ".... you're gonna have a bad time."
  • theotherscotty#9105 theotherscotty Member Posts: 385 Arc User
    edited September 2016
    Well, if it's around $100, I'll have to pass. For around $20 or $30, sure, I'd buy it, but not for $100 or $200.
  • breadandcircusesbreadandcircuses Member Posts: 2,355 Arc User
    edited September 2016
    they are also really big. see sunglasses in bottom of pic...
    h66nI2k.jpg
    Cryptic is nothing if not creative in searching for additional income streams from the venerable Trek franchise! This will become a RL version of the GPL trophies for sale in-game, and displayed in the mess hall or ready room. The price will be predictably high, since every model will be unique; the color & material variants alone will pretty much guarantee that. So for the most addicted captains, even the flagship of each 'toon displayed on the wall in one's gaming room will likely require a princely sum, proudly proclaiming their obsession! :D

    PS - I wonder how many model owners will go the extra mile to install the correct lighting? :p

    Also, will prices vary depending on ship sizes? I mean a Defiant is smaller than a Sovereign, yo.

    Yeah, I don't think those are scaled properly... that's a really BIG Delta Flyer.
    now that I have a T6 Connie this would make me happy.

    Hell, out of game you can print a T1 Connie and call it T6. :wink:
    Ym9x9Ji.png
    meimeitoo wrote: »
    I do not like Geko ether.
    iconians wrote: »
    With each passing day I wonder if I stepped into an alternate reality. The Cubs win the world series. Donald Trump is President. Britain leaves the EU. STO gets a dedicated PvP season. Engineers are "out of control" in STO.​​
  • ikonn#1068 ikonn Member Posts: 1,448 Arc User
    I suddenly feel the urge to buy a K't'inga through this...
    -AoP- Warrior's Blood (KDF Armada) / -AoP- Qu' raD qulbo'Degh / -AoP- Project Phoenix
    Join Date: Tuesday, February 2, 2010
  • I'd like to have a Klingon Bird Of Prey with wings that can move up and down, retractable landing gears, and a ramp that can open and close (I like little details like that).
  • lopequillopequil Member Posts: 1,226 Arc User
    The finish isn't great, but hey it's 3D printed so one can't expect gloss. It's still very tempting indeed and for £100 it's probably something I might buy myself for Christmas; not cheap but not beyond reach either.

    I wonder if they're solid or hollow... Looking at the examples make me start thinking about needle files and LEDs.

    Look, they sell Imps from War for The Overworld...
    ...
    TAKE MY MONEY!
    Q9BWcdD.png
  • wraithshadow13wraithshadow13 Member Posts: 1,728 Arc User
    tom61sto wrote: »
    These are going to be expensive, hundreds of dollars range based on what I'm seeing on the Eucl3D site.

    There's Elite: Dangerous space ships in their store already, $30 for the 3 inch long Viper, $99 for the 5 inch long. I would expect at least $199 for a 12" ship that the STO series seems to be, possibly higher just scaling off that.


    I think I'd be willing to do $10-15 for a 3-5" ship as long as the detail was there. Maybe $50-75 for the foot long ships. $80-90 if those ships were shipped with a 4-6" version of my captain where I get to select poses and weapons.

    What are you guys willing to pay for this stuff?
  • i2hellfirei2hellfire Member Posts: 27 Arc User
    edited September 2016
    Here is another shot of the ships, with Denise Crosby as a backdrop.

    NsdDYNK.jpg
  • dkeith2011dkeith2011 Member Posts: 595 Arc User
    From the Eucl3D FAQ:

    How much do your products cost?

    We have ranging prices for our different video game partners but generally speaking we start at $29 for our 4 inch long models and $99 for our 8 inch long models. Some games do have a $49 price point available. No matter what craft, vehicle, or avatar that you purchase the price will be in one of those categories.
  • dmensionhatrossdmensionhatross Member Posts: 64 Arc User
    This is ridiculously cool! Fingers crossed the price doesn't steal my excitement.
  • johnnymo1johnnymo1 Member Posts: 697 Arc User
    one of the questions asked at the announcement panel was will this also be available for my character and bridge officers, the response was we are working on it. the printed models look amazing in person!
  • seaofsorrowsseaofsorrows Member Posts: 10,918 Arc User
    Looks cool indeed.. but I have the sinking feeling that these are going to be insanely expensive.

    We'll see what happens, but I would love to get one for my Odyssey, Arbiter, or even my Vengeance. I do kinda wish they weren't all the same size though, so if you have multiple ships you can see the size difference.

    Probably a moot point though, since pricing will likely make the purchase of multiple ships fairly unreasonable.
    Insert witty signature line here.
  • nikeixnikeix Member Posts: 3,972 Arc User
    Similar services for World of Warcraft are in the $200-$300 range. For smaller figures.

    If prices is at all an issue for you I'd recommend remaining calm. These are still short run, fully painted figures. That's not cheap. Doubly so for a licensed product from Star Trek.

    Because make no mistake, CBS is getting their cut too.
  • nikeixnikeix Member Posts: 3,972 Arc User
    edited September 2016
    Note how they say "you can print the ships" instead of "you can have them printed" or "you can get printed ships".

    Hmm... they appear to do the printing and painting themselves. Not sure what to think because the phrasing of the post is very "We're making files available" but that's not that company's business model.
  • wendysue53wendysue53 Member Posts: 1,569 Arc User
    edited September 2016
    Really? Hmm... Somehow I don't think they'll let me have mine.

    NcM8FSs.jpg

    http://www.arcgames.com/en/forums/startrekonline/#/discussion/1221008/cargo-ship-to-the-max

  • It'd be even cooler if they were all the same scale, tho some would be huge and others would be tiny.
  • nikeixnikeix Member Posts: 3,972 Arc User
    The ones I'd be interested in are Cryptic originals (e.g. the two Tal Shiar adapted ships), so it's pretty much this or nuthin' for me.
  • bloodyrizbloodyriz Member Posts: 1,756 Arc User
    I want my Risian Corvette!​​
    signature.png
    We come in peace, SHOOT TO KILL!
  • atlmyklatlmykl Member Posts: 305 Arc User1
    tom61sto wrote: »
    These are going to be expensive, hundreds of dollars range based on what I'm seeing on the Eucl3D site.

    There's Elite: Dangerous space ships in their store already, $30 for the 3 inch long Viper, $99 for the 5 inch long. I would expect at least $199 for a 12" ship that the STO series seems to be, possibly higher just scaling off that.


    I think I'd be willing to do $10-15 for a 3-5" ship as long as the detail was there. Maybe $50-75 for the foot long ships. $80-90 if those ships were shipped with a 4-6" version of my captain where I get to select poses and weapons.

    What are you guys willing to pay for this stuff?

    $200-$300

    Its a custom printed and painted foot long model of a licensed product.

    I'll get 2-3 and hope they will eventually do captains with away team.
  • alexraptorralexraptorr Member Posts: 1,192 Arc User
    My Dream would be to have the shisp of my four faction main characters along with my captains standing on a shelf, something that will still be around and endure beyond STO's existence. :)
    "If you can't take a little bloody nose, maybe you ought to go back home and crawl under your bed. It's not safe out here. It's wondrous, with treasures to satiate desires both subtle and gross. But it's not for the timid." - Q
  • ^ @alexraptorr: That'd be cool.
  • lopequillopequil Member Posts: 1,226 Arc User
    If I were you nikeix, I'd be more interested in how they plan on making a model Tarantula. So many small, fiddly bits.
    Q9BWcdD.png
  • thlaylierahthlaylierah Member Posts: 2,983 Arc User
    At first I thought that was the new poll created Fed Carrier, then I realized it is the Battle Cloak Escort.

    Sorry they look the same and it still hurts.
  • farmallmfarmallm Member Posts: 4,630 Arc User
    Price will be a factor. I doubt I will end up with one.
    Enterprise%20C_zpsrdrf3v8d.jpg

    USS Casinghead NCC 92047 launched 2350
    Fleet Admiral Stowe - Dominion War Vet.
Sign In or Register to comment.