test content
What is the Arc Client?
Install Arc
Options

(PC) Question about stacking ArPen

santralafaxsantralafax Member, NW M9 Playtest Posts: 2,896 Arc User
edited September 2016 in The Militia Barracks
Is there an upper limit in PVP, where more ArPen is just a wasted stat? 140% RI? 160%? 180%? I get a little confused on DR and Tenacity interaction, not to mention Deflect being yet a separate layer.... There are definitely players that seem virtually untouchable regardless of RI.

At any rate, if I'm wasting stacks of stats, I'd like to find out!
Post edited by santralafax on

Comments

  • Options
    santralafaxsantralafax Member, NW M9 Playtest Posts: 2,896 Arc User
    edited September 2016
    I've seen that on Combat HR's but not on a GWF.

    I think *Lancer* last posted 130.5 RI. I believe IcyDrake last posted 160 or 168 RI. I haven't noticed much difference between 140 and 156. I was just curious if anyone had tested this out or put together a spreadsheet comparing ArP vs Tenacity/DR.
  • Options
    jakob522jakob522 Member Posts: 3 Arc User
    I think your standard average player will have roughly 130% total DR you need to cut through so GFs will have a bit more thus being harder to kill and something like and HR will have less than that making them easier to kill so it's just an average number I think.
  • Options
    icyphishicyphish Member, NW M9 Playtest Posts: 1,255 Arc User
    I only have like 90% RI now, it seem to work fine too lol :D
    icydrake%20avatar2_zpsg7rp0xti.jpg

    Author of GWF Speed Demon PvP Build (Mod 11) <- Click to reveal the Speedy Beast! >:)
  • Options
    gomok72gomok72 Member Posts: 616 Arc User
    I run about 120-130% RI, reason being I have fought a lot of CW (double bubble build), GWFs and GF at 90% RI and it was like tickling them with a feather ( I usually ended up dead). I have found that optimized for me as a SW was 120-130%. This RI gives me enough punch to get through their heavy defenses and T.Negation's/Feytouch's synergistic effects.

    I may not be considered by most the BEST PVP Warlock on the server but, I am the most HATED amongst them.

    -Kymos
  • Options
    someonediessomeonedies Member, NW M9 Playtest Posts: 1,257 Arc User
    20000 Arm.Pen = 149.24% RI
    17000 Arm.Pen = 129.99% RI
    14000 Arm.Pen = 110.22% RI
    11000 Arm.Pen = 89.79% RI

    25 CON = 15% RI
    25 CON (Constitution Focus) = 2.0% RI
    Forbidden Piercing = 3% RI
    Rimuru?
    Dead 🔪
  • Options
    someonediessomeonedies Member, NW M9 Playtest Posts: 1,257 Arc User
    I run 135% but it definitely seems like it's wasted.
    Rimuru?
    Dead 🔪
  • Options
    santralafaxsantralafax Member, NW M9 Playtest Posts: 2,896 Arc User
    icyphish said:

    I only have like 90% RI now, it seem to work fine too lol :D

    Ah, so you have been changing things around. :-)

    I know when I went from 90% to 120%, back in Mod 7, I noticed a real difference. And I've put on some ArPen since then, but wondered if it was being wasted. I just threw my AxeBeak out the window for some other stats.

    Now if I could just find me a BI Warhorse....
  • Options
    santralafaxsantralafax Member, NW M9 Playtest Posts: 2,896 Arc User

    20000 Arm.Pen = 149.24% RI
    17000 Arm.Pen = 129.99% RI
    14000 Arm.Pen = 110.22% RI
    11000 Arm.Pen = 89.79% RI

    25 CON = 15% RI
    25 CON (Constitution Focus) = 2.0% RI
    Forbidden Piercing = 3% RI

    Those are some good stats to have on file. I was curious where other folks drew the line on ArPen, thanks for that as well!

    It is much easier to say 60% for PVE than decide what you need for PVP. That 60% came from players publishing tests--in that case Lazalia. PVP goes off into the stratosphere.
  • Options
    thefabricantthefabricant Member, NW M9 Playtest Posts: 5,248 Arc User
    I have published info for arp in my CW guide just fyi for anyone curious.
  • Options
    santralafaxsantralafax Member, NW M9 Playtest Posts: 2,896 Arc User
    edited September 2016

    I have published info for arp in my CW guide just fyi for anyone curious.

    I'll check that out! You're one of the people I think about when I ask these questions, but I know you don't PVP.

    Edit: @thefabricant With the new PVP sets breaking 4000 tenacity, does that change your calculation? Would that put it closer to, say 110 RI?
    Post edited by santralafax on
Sign In or Register to comment.