test content
What is the Arc Client?
Install Arc

Publishing getting stuck at 75%/ Failing (Resolved!)

ashkrik23ashkrik23 Member Posts: 10,809 Arc User
Anyone else having trouble publishing missions? I took a mission down earlier to fix some bugs and now it refuses to publish. It gets stuck at 75% constantly.
King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
ashkrik_by_lindale_ff-d65zc3i.png
Post edited by ashkrik23 on

Comments

  • stoutesstoutes Member Posts: 4,219 Arc User
    edited August 2013
    It could be that they've started the backup or any other sync task this moment which could interfere with publishing.

    I would say; save it, wait for around 30 mins and try again. If it doesn't help, try creating a ticket.
    maxvitor wrote: »
    Nerf is OP, plz nerf
    That's quite the paradox, how could you nerf nerf when the nerf is nerfed. But how would the nerf be nerfed when the nerf is nerfed? This allows the nerf not to be nerfed since the nerf is nerfed? But if the nerf isn't nerfed, it could still nerf nerfs. But as soon as the nerf is nerfed, the nerf power is lost. So paradoxally it the nerf nerf lost its nerf, while it's still nerfed, which cannot be because the nerf was unable to nerf.

    I call it, the Stoutes paradox.
  • ashkrik23ashkrik23 Member Posts: 10,809 Arc User
    edited August 2013
    All right. I'll try. Thanks for the help.


    I really hope it publishes again with these new fixes. Some of my friends didn't even make it to the ending.
    King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
    ashkrik_by_lindale_ff-d65zc3i.png
  • mazikenmaziken Member Posts: 132 Arc User
    edited August 2013
    Greetings,

    I have tried to re-publish my mission "Here Today, Gorn Tomorrow" after I fixed a bug in a spawn location. I have tried twice and both times it fails to publish. I get an in-game mail telling me so.

    Is this a known issue?
  • voporakvoporak Member Posts: 5,621 Arc User
    edited August 2013
    A friend of mine was trying to republish his mission today to fix critical bugs, but he had publish failures also. So it's not just you.
    I ask nothing but that you remember me.
  • ashkrik23ashkrik23 Member Posts: 10,809 Arc User
    edited August 2013
    voporak wrote: »
    A friend of mine was trying to republish his mission today to fix critical bugs, but he had publish failures also. So it's not just you.

    Yea, this mission really needed the fixes. I'm really upset.


    EDIT: I gave it a break and came back later. It still won't publish.
    King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
    ashkrik_by_lindale_ff-d65zc3i.png
  • markhawkmanmarkhawkman Member Posts: 35,236 Arc User
    edited August 2013
    Sometimes it just hangs... It may or may not finish if you wait a long time.
    -=-=-=-=-=-=-=-
    My character Tsin'xing
    Costume_marhawkman_Tsin%27xing_CC_Comic_Page_Blue_488916968.jpg
  • ashkrik23ashkrik23 Member Posts: 10,809 Arc User
    edited August 2013
    Sometimes it just hangs... It may or may not finish if you wait a long time.

    Every time I waited it got to like an hour, then said it failed. When I went back in, it still said it was publishing.
    King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
    ashkrik_by_lindale_ff-d65zc3i.png
  • pwebranflakespwebranflakes Member Posts: 7,741
    edited August 2013
    Thanks for the report, authors. The team is aware and is investigating. As soon as I have an update, I'll be sure to post here.

    Cheers,

    Brandon =/\=
  • ashkrik23ashkrik23 Member Posts: 10,809 Arc User
    edited August 2013
    Thanks for the report, authors. The team is aware and is investigating. As soon as I have an update, I'll be sure to post here.

    Cheers,

    Brandon =/\=

    Thank you. I hope this can be fixed by tomorrow.
    King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
    ashkrik_by_lindale_ff-d65zc3i.png
  • ashkrik23ashkrik23 Member Posts: 10,809 Arc User
    edited August 2013
    EDIT: It's fixed!
    King of Lions rawr! Protect the wildlife of the world. Check out my foundry series Perfection and Scars of the Pride. arcgames.com/en/forums#/discussion/1138650/ashkrik23s-foundry-missions
    ashkrik_by_lindale_ff-d65zc3i.png
  • pwebranflakespwebranflakes Member Posts: 7,741
    edited August 2013
    ashkrik23 wrote: »
    EDIT: It's fixed!

    Thanks for reporting in :) The team continues to monitor, but some authors may still experience publishing getting stuck or failing (that's why I had not posted an update yet). As soon as I know the issue is resolved, I'll be sure to post here.

    Cheers,

    Brandon =/\=
  • mazikenmaziken Member Posts: 132 Arc User
    edited August 2013
    I'm happy to report that my mission did republish successfully as well, although it took like 75 minutes to do so. Not sure if this is the new norm, but I remember my missions taking somewhere between 15 and 20 minutes to publish before.
  • drogyn1701drogyn1701 Member Posts: 3,606 Media Corps
    edited August 2013
    Don't know if it helps or not but I thought I should report that I successfully test-published a mission Sunday night. Looked for a minute like it was going to hang at 75%, but it continued on.
    The Foundry Roundtable live Saturdays at 7:30PM EST/4:30PM PST on twitch.tv/thefoundryroundtable
  • pwebranflakespwebranflakes Member Posts: 7,741
    edited August 2013
    I'm happy to report that the issue is resolved! Thanks for your patience, authors!

    Cheers,

    Brandon =/\=
This discussion has been closed.