Reach Markers Not Showing Up on Mini Map

djxprime

I'm having an issue after the most recent downtime and republish where some reach markers in multiple missions are not showing up on the mini map. They still work when a player walks into them, but with them not appearing on the mini map, it can make it difficult for the player to find their way to the objectives.

The problem has mostly involved maps using the Empty Ground Map, but I have seen the problem on a map made from Sierra Outpost II Station Interior. So far I have tried repositioning the markers, resizing them, and even replacing them. I've also checked to make sure that the radius of the markers is suitable and that the waypoints on them are set to automatic.

Anyone else running into this issue?

duncanidaho11

Mattjohnsonva was having similar issues. Here's the thread:
https://www.arcgames.com/en/forums/startrekonline/#/discussion/1240127/place-markers-no-longer-showing-up-in-published-missions

He found that removing and then rebuilding the objective cleared the problem. Same map, same objective setup, different result. Could be an infrequent bug with the story tab, somewhat similar to what we were seeing with objectives that wouldn't register in preview mode (doesn't build properly) but it's really hard to say from our end. If you notice it happen, try to remember what you were doing just before.