test content
Logo
What is the Arc Client?
Install Arc
Aegis Mk XIV problems.
tomgonjinn23
Member Posts: 204 Arc User
Not entirely sure if this goes here but of course if it doesn't our excellent forum moderators will fix that. ( Sounds like scarcasm isn't meant to be).
Anyway on my new klink (Delta Recruit) tac flying a T6 Negh I bought some mk xii aegis from the exchange and upgraded from to mk xiv.
MY problem is when I go into a mission the shield strength changes.
No i'm not getting hit and shields are going down.
For example in sector space I have a ccapacity of 8.5k
I just ran a crystal adv. I had 4k shields with 3 mk xiii very rare shield gens on my ship.
Des anyone know of a fix to this. I can provide more info if needed.
Thanks for the help.
Anyway on my new klink (Delta Recruit) tac flying a T6 Negh I bought some mk xii aegis from the exchange and upgraded from to mk xiv.
MY problem is when I go into a mission the shield strength changes.
No i'm not getting hit and shields are going down.
For example in sector space I have a ccapacity of 8.5k
I just ran a crystal adv. I had 4k shields with 3 mk xiii very rare shield gens on my ship.
Des anyone know of a fix to this. I can provide more info if needed.
Thanks for the help.
Post edited by tomgonjinn23 on
0
Comments
What level are you and, what level is the mission at when you enter it?
An example would be a lvl60 character, than entering a lvl50 mission, would normally be dropped to lvl50 to match, hence where some loss to hull/shields/traits/etc. can be effected!
Praetor of the -RTS- Romulan Tal Shiar fleet!
Mission is advanced difficulty.
Well, lvl51 isn't a DM in the FDF, that is lvl60 so, when you plopped into a lvl50 - lvl60 mission, it will normally match you to the highest level player or, simply the highest lvl possible [example lvl60 DM].
Once this occurs, you will be brought up to match that lvl temporarily, until you leave.
At which point, you drop back down to lvl51 and, so to does all your gains.
So, it might be a possibility, that this is what you are seeing happening?
Also, sector space shows everything at base values, while in combat/orbital space/ground [effect ground only], will show overall values effected by skills/traits/level/gear/etc.
Praetor of the -RTS- Romulan Tal Shiar fleet!
Other than a bug they had not too long ago, only showing shield array base values, I couldn't really tell you what is the problem unless I seen it myself.
Because normally, the only other things that could effect it, would be level changes by mission lvl requirements/cap, sector vs orbital space, or shield boosting items not taking effect or, skill tree not valid requiring a repsec, or traits/specialization not valid.
But, than again, it isn't un-common for upgraded gear, to become bugged in rarity/mk# effects either.
So, tough one to say my friend.
Praetor of the -RTS- Romulan Tal Shiar fleet!
Bascially when I join a mission with my current stats and etc. my shields should be 17k at least. However whenever I join a mission they are 4187k.
These are VR Mk XIV Aegis shields which I bought on the exchange on a T6 Negh'var on a Tac Klingon Delta recruit.
I have no idea why this is happening.
Neither do I, since going from as you said 17k to roughly 4k, is a huge loss!
Since they are mkxiv, it could be a bugged upgrade issue, because even using a negh'var kdf ship, with their lower shield mods wouldn't cause that much of a loss.
And, since you said the mission is a higher lvl than 51 capped, than lvl differential shouldn't be the issue either.
The only things that could be causing this, is the shield array itself and/or any shield boosting items not responding correctly.
I hope you have bug reported it?
Praetor of the -RTS- Romulan Tal Shiar fleet!