test content
  • Games
  • Social
  • Arc News
  • Support
  • Zen
What is the Arc Client?
Install Arc
Forums > Home› Neverwinter Game Support› Peer to Peer Tech Forum

very very low settings, still unplayable

strassen#7620 strassen
strassen#7620
 Member Posts: 1 Arc User
in Peer to Peer Tech Forum
Hello,


I took a long time to be in distress are heard here I searched the internet but could not find a full solution by writing requirement.

System requirements are as follows:

Operating System: Windows

CPU: Intel® Pentium® 4 at 1GHz, (Mid to High Range Dual-Core 2.5GHz CPU or better recommended.)

RAM: 1GB of RAM (2GB or more recommended for XP, 3GB or more for Windows Vista and Windows 7)

Graphic Display: 3D video chipset with pixel and vertex shader model 1.3 supported. GeForce 4 Ti4200 64MB or ATI Radeon 8500 64MB or newer for Windows XP. For Windows Vista and 7, a GeForce FX 5200 128MB or ATI Radeon 9500 128MB or newer is needed.

My system; Pentium Dual Core 2.5 GHz

4 GB of RAM

AMD Radeon HD 5450

I know that a system is good, but "to the extent not play" the muscle to normal? forums "-d3d11enable 0," he spent significant to some extent to muscle ahead about 6-7 months I wrote the code had set but came back muscles, with incoming new patch and I do not play despite hold in the lowest setting that game can be.

Comments

  • kreatyvekreatyve Member, Neverwinter Moderator, NW M9 Playtest Posts: 10,545 Community Moderator
    I believe that they do need to increase the system requirements for the game, as I am currently using a computer that is slightly worse than yours and I can't really play right now either.
    My opinions are my own. I do not work for PWE or Cryptic. - Forum Rules - Protector's Enclave Discord - I play on Xbox
    Any of my comments not posted in orange are based on my own personal opinion and not official.
    Any messages written in orange are official moderation messages. Signature images are now fixed!
    kuI2v8l.png
  • lewstelamon01lewstelamon01 Member Posts: 7,415 Arc User
    edited May 2016
    There's a difference between "can you run this" and "can you run this well" Sure, I can run Neverwinter on my out-of-the-box ASUS laptop with a Celeron (yes, Celeron) processor...but it runs rather slowly and choppy.

    System requirements are usually bare-bones requirements for the game to run at all on your system--that doesn't mean that it'll run at peak performance. Unfortunately, there isn't a set of "recommended" requirements per se, but I'd recommend a system specifically designed for gaming. Ultimately, though, client optimization can play a huge factor in your experience as well.
    ROLL TIDE ROLL

    Great Weapon Fighter: Because when is today not a good day to die?

    PC and PS4 player. Proud Guildmaster for PS4 Team Fencebane. Rank 5 Officer for PC Team Fencebane. Visit us at http://fencebane.shivtr.com
  • doctordnadoctordna Member Posts: 65 Arc User
    My rig is actually running this just fine and is less than what you have listed. Let's compare notes;
    Your PC
    • Pentium Dual Core 2.5 GHz
    • 4 GB of RAM
    • AMD Radeon HD 5450
    My PC
    CPU: Intel Pentium Dual 2.2 Ghz
    Architecture: i686
    CPU op-mode(s): 32-bit, 64-bit
    Byte Order: Little Endian
    CPU(s): 2
    On-line CPU(s) list: 0,1
    Thread(s) per core: 1
    Core(s) per socket: 2
    Socket(s): 1
    Vendor ID: GenuineIntel
    CPU family: 6
    Model: 15
    Stepping: 13
    CPU MHz: 2203.000
    BogoMIPS: 4399.46
    L1d cache: 32K
    L1i cache: 32K
    L2 cache: 1024K

    RAM: 2 GB
    GPU: 1 GB AMD/ATI Radeon HD 5000 Series
    Other Hardware
    Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
    PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
    Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
    PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
    PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
    USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
    USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
    USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
    USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
    USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
    PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
    IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
    SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
    Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)


    However this is probably the difference:
    OS: Linux Kubuntu 14.04, running WINE version 1.7.44
    System Requirements for OS;
    CPU: Single core 1 GHz or better
    RAM: 512 MB or more
    HDD: 10 GB or more with 4 GB free space
    GPU: Standard VGA

Sign In or Register to comment.