test content
What is the Arc Client?
Install Arc

New Graphics setting's issue

hokeb1hokeb1 Member Posts: 1 Arc User
below are two screen shots of graphics issues I'm having. I have tried updating my graphics drivers, changing the settings on all three graphics related tabs one by one with no luck.


screenshot_2014-03-22-12-27-01.jpg





screenshot_2014-03-22-12-25-42.jpg


Everything looks and acts as it should on holodeck as well as my computer in general.

Anyone have any thoughts of suggestions for settings
Post edited by hokeb1 on

Comments

  • maxvitormaxvitor Member Posts: 2,213 Arc User
    edited March 2014
    Try Turning off cinematic focus.
    If something is not broken, don't fix it, if it is broken, don't leave it broken.
    Oh Hell NO to ARC
  • hokeb1hokeb1 Member Posts: 1 Arc User
    edited March 2014
    maxvitor wrote: »
    Try Turning off cinematic focus.


    been there, done that. no go. thanks for the thought:)
  • josephdridgewayjosephdridgeway Member Posts: 517 Arc User
    edited March 2014
    Looks like your resolution is set low. Check that, and if it is, slide it all the way to the max percentage.

    That can now be found on the Display tab, under options. I believe it is defaulting to 50%.
    Fleet Admiral Joseph D. Ridgeway
    The Armada
    Original join date: Feb 5, 2010
    Twitter: @davejl_99, & @STO_BBArmada
  • hokeb1hokeb1 Member Posts: 1 Arc User
    edited March 2014
    Looks like your resolution is set low. Check that, and if it is, slide it all the way to the max percentage.


    that's funny, I was just about to post my findings on this setting. It was at the minimum value of 0.50. i turned it up to 1.00 and life is good again.


    thanks all:D
Sign In or Register to comment.