test content
What is the Arc Client?
Install Arc

DPS Expl .Cruiser build feedback

fuzzyidiomsfuzzyidioms Member Posts: 0 Arc User
edited August 2012 in Federation Discussion
I currently run a Expl. Cruiser with a Tetryon setup

Four Tetryon cannons mk VII &VIII

Two Tetryon turrets mk VII

One Polaron turret mkVIII

Tetryon Pulse Generators mk VI and VII adding a rough total of + 30+/-

(I'm doing this from memory on my phone sorry for the vagueness)

EPS Flow Regulator mk VIII +45% Power Transfer Rate

thats all I can recall now I will update in 10 hours when I get back into town and can log in
Post edited by fuzzyidioms on

Comments

  • kylesal24kylesal24 Member Posts: 312
    edited August 2012
    Right now it does not really matter what you are using because you are not an Admiral yet. Once you get there then getting a good build matters. What you have right now should get you all the way to lvl 40. Then stuff you pick up and the good stuff off of this ship will get you to 50. Then the builds matter.

    At that point the build depends on what ship you have. If you are using a cruiser then 6 or 7 beams plus a torpedo is a good build.

    Kyle
    Delta Fleet Command
  • reginamala78reginamala78 Member Posts: 4,593 Arc User
    edited August 2012
    You'll replace this cruiser with another one in a day or two, so don't worry about it too much. Probably shouldn't mix energy types though, since it helps to stack multiple consoles of one kind. Also the EPS console only helps recovery from big drains like Full Impluse and Beam Overload, so for an couple of cannons it won't help you enough to be worth using a console slot for.
Sign In or Register to comment.