test content
  • Games
  • Social
  • Arc News
  • Support
  • Zen
What is the Arc Client?
Install Arc
Forums > Home› Controls and Interface

360 controller suddenly changed?

revjimrevjim Posts: 14 Arc User
in Controls and Interface
I've been playing CO since it went F2P and quickly became a life-timer. I was ecstatic when I discovered I could use my 360 controller and have used the same setup for years which was the default the first time I plugged in my controller:

RB = next target
LT + RB = prev target
RT + RB = switch between hostile/friendly targetting
LB + RB = clear target
LB + move RStick = switch target to next in that direction
A or B = Jump or if Flying Move up
RT + A or RT+B = Down
LStick B = travel power 1
RT + LStick B = travel power 2
RStick B = Zoom (Press again to cycle through 3 levels of Zoom)
RT + LT = Block
X or Y or B = powers 0, 1, 2
LT + X or Y or B or A = Powers 3, 4, 5, 6
LB + X or Y or B or A = Powers 7, 8, 9, 10
RT + X or Y or B = Powers 11, 12, 13
DPad_Right + X or Y or B or A or RB = Devices 0, 1, 2, 3, 4
DPad_Down + X or Y or B or A = switch build to Offensive, Defensive, Balanced, Support
DPad_Up = Interact (With Keyboard/Mouse controls it is known as hitting the "Z" key on Keyboard)
DPad_Left = Not mapped to a known function
Dpad_Left + X or Y or B or RB = Not mapped to a known function.

Suddenly, this past month the entire scheme changed (RB & LB change camera distance, have to hold trigger to look around with left stick, etc...)
I've tried every combination of control scheme and key bind set and even reset to defaults but nothing has been able to restore the above mapping.
Am I doomed to have to manually map all the key bindings? Or is there a simple fix I'm missing? The controller itself still works fine in other games.
Note, I've run this game on at 5 different computers with Win 7 and Win 10 and it's always had the scame mapping without me doing anything.

Comments

  • silvergryphsilvergryph Posts: 63 Arc User
    Try these steps:
    Run the command /unbind_all

    Then open Options and click on Controller. Make sure "Joysticks" is set to Off and "Xbox Gamepads" is set to On.

    Click on Controls and click Reset to Defaults. Make sure Mmo Controls, Champions Default, Free camera and On move are all selected for the first four options.

    Then click on Key Binds and click Reset to Defaults.

    Then click on HUD and click Reset to Defaults.

    This should now be the controller settings for a fresh install. Test.

    If that didn't do the trick, then exit the game and copy all of the following into a text file and save it in your Live folder as "xbdefaults.txt":

    AB +up
    XB +PowerTrayExec 0
    YB +PowerTrayExec 1
    BB +PowerTrayExec 2
    LTrigger+XB +PowerTrayExec 3
    LTrigger+YB +PowerTrayExec 4
    LTrigger+BB +PowerTrayExec 5
    LTrigger+AB +PowerTrayExec 6
    LB+XB +PowerTrayExec 7
    LB+YB +PowerTrayExec 8
    LB+BB +PowerTrayExec 9
    LB+AB +PowerTrayExec 10
    RTrigger+XB +PowerTrayExec 11
    RTrigger+YB +PowerTrayExec 12
    RTrigger+BB +PowerTrayExec 13
    RTrigger+AB +down
    LStick +PowerTrayExec 14
    RTrigger+LStick +PowerTrayExec 15
    LTrigger+RTrigger +PowerTrayExec 16
    RStick camCycleDist
    RTrigger+RB
    RB +clientTarget_Next 0
    LB +clientTarget_Prev 0
    LB+RB +clientTarget_Next 1
    LB+RStick_Down clientTarget_Manual 1 0 0
    LB+RStick_Up clientTarget_Manual -1 0 0
    LB+RStick_Left clientTarget_Manual 0 -1 0
    LB+RStick_Right clientTarget_Manual 0 1 0
    Joypad_Right+XB +InventoryExec Devices 0
    Joypad_Right+YB +InventoryExec Devices 1
    Joypad_Right+AB +InventoryExec Devices 2
    Joypad_Right+BB +InventoryExec Devices 3
    Joypad_Right+RB +InventoryExec Devices 4
    Joypad_Left+XB +InventoryExec Head 0
    Joypad_Left+YB +InventoryExec Body 0
    Joypad_Left+AB +InventoryExec Offense 0
    Joypad_Up +Interact
    Joypad_Down+XB Buildset 0
    Joypad_Down+YB Buildset 1
    Joypad_Down+BB Buildset 2
    Joypad_Down+AB Buildset 3
    Joypad_Down+RB Buildset 4
    Start GameMenu 1
    Select GenSendMessage Root ShowCharacterMenu$$GameMenu

    Log back in and run /bind_load_file xbdefaults.txt
  • revjimrevjim Posts: 14 Arc User
    Thank you Silvergryph. Unfortunately neither method worked. Honestly, I would think the controller went out but it still works fine in other games. I thinking about uninstalling the game completely and reloading. I'll post the results.
  • revjimrevjim Posts: 14 Arc User
    Hmm. remote/reinstall did not resolve the issue. Iuninstalled through both Arc and Steam but interestingly both left the 5.6 gigs of files on the drive. I manualy deleted before reinstall but it's still doing the same thing. Maybe remove and reinstall the controller drivers in windows.
  • silvergryphsilvergryph Posts: 63 Arc User
    Reinstalling Directx might be worth trying too.
  • revjimrevjim Posts: 14 Arc User
    Yeah. I moved the controller to another Win 10 machine that already had CCO installed and it worked perfectly so the controller itself is confirmed good.
  • phammcastphammcast Posts: 6 Arc User
    Yeah, they screwed my ability to use the controller too. I was told to come here, but I'm pretty sure I'd have about as much success with that as you rev. They need to just fix what they broke. I paid for a LTS too and this is not right at all!
Sign In or Register to comment.